Japanese Chinese
Site Map Site Search
HOME About SEKISUI Investor Relations Products CSR SEKISUI Companies
HOME > Fine Chemicals > Photosensitive Resin

UV cure sealant 'PhotoLec S' series for LCD open-cell drop filling (ODF)

UV cure sealant for LCD which does not contaminate LC.

PhotoLec S is an LCD sealant that readily cures by UV irradiation and gives little elution of resin or additives to LC.

Advantages

1. Very little contamination to LC maintains the display quality.

  Little elution of resin or additives by LC takes place.
  It cures readily by UV even if the shielded area is dominant, leaving no uncured resin which can contaminate LC.
2. Long pot life at room temperature allows easy handling and good workability.
3. It gives good adhesion to various substrate materials.
4. It does not contain any sizable solid pieces and functions well in narrow gaps.

Application(Function)

・LCD periphery sealant

Drop filling process and requirements of UV cure sealant


LC filling process (conventional method)

LC filling (ODF)

Sealant requirements
· Proper viscosity
· Pot life
· Availability of particle mix
· Contamination-proof
· Proper viscosity
  Availability of particle mix
· Proper UV-curability
   
· Properheat-curability
   
· Good adhesion
   

Advantages of PhotoLec S
· Viscosity adjustment to the requirement
· Stable viscosity at room temp. for more than 48 hrs.
· No impurity by strict process and quality controls
· Unique formulation for contamination-proof.
· High photo-sensitivity to assure curing and LC sealing
· Good heat-curability despite the room temperature stability, to assure final curing during the annealing process

Common application method of sealant

Narrow edge application of sealant
  PhotoLec S-WB
Compound Special epoxy-acrylic resin
Appearance Opaque viscous paste
Viscosity (mPa・s, at 25oC) 400,000 ± 80,000
Standard UV dose 3,000mJ
Standard heat dose 120oC x 60 min.
Cured hardness (Shore D) 91
Adhesion (ITO to ITO) 15.9 (N/mm)

Pot life

(mPa・s,at 25oC)
Initial 400000
After 48 hrs. 410,000

LC specific resistance

(UV cure sealant / LC = 1 / 1, heated)
1.05E13
(blanc:1.09E13)
Eluent ion conductivity 2.5µS/cm
Foreign matters of 5μm and larger Not detectable
Viscosity will be adjusted to the requirement.


Please feel free to consult with us.
The best choice of sealant and the applying conditions will be advised.

??????

Adequate sealant will be offered for indivisual LCD panels.
Details are available on request.

 


Page Top

Privacy Policy Contact
Copyright (C) 2007 SEKISUI CHEMICAL CO., LTD.